how to use a jointer image

7 Step Guide about Using a Jointer for Woodworking | Safety Tips

Ever used a jointer? Using a jointer is not an easy task unless you are a professional woodworker. However, a certain procedure is to be followed to use a jointer. If you want to learn a safe and proper way to handle a jointer, then you are at the right place. Let’s see how to use a wood jointer.

How to Use a Jointer?

Since you now have decided to work with a jointer, you should be acquainted with its working techniques and safety measures. Follow the below-mentioned steps on how to use a joiner:

Step 1: Be Acquainted

To use it properly, you should know what it is capable of and how to achieve the best of it. A manual is always there for guidance for perfect depth. Also, make sure to use it safely. Before using, fine-tune it accordingly to help you to avoid any crooked edges.

Step 2: Fence Time

This is the time to work on the fence. Try putting it in a square position as if not, then it may lead to inconvenience later or during the process.

Step 3: Working with Ranges and Numbers

Now that you have a board to run through, you should put the lower limit of all the values. It is also to put the lower limit of length and breadth of the board you are working on. For reference, you can check the manuals for convenient ranges. You also have to enter the upper limits as they are responsible for finishing the end product. Put infeed and outfeed values accurately since there is a limit to the size.

Step 4: Depth

Now, since you have entered all the infeed and outfeed values, you now have to put the depth. Calibrating the depth of your piece is essential for a smooth cut. This will help you get a proper cut in minimal time. Avoid putting aggressive values to reduce the risk of getting damaged.

Step 5: Read the Grain

While using a jointer, it becomes necessary to understand the properties of the grain/wood. The quality of wood plays a vital role in the outcome. This will help you avoid the extra tearing of wooden fibers. Apart from the quality of the wood type of wood, the depth and sharpness of the knife should be considered.

Step 6: Flattening and Feeding Procedure

Before edge jointing goes with face jointing. This will help you achieve a flattened and level surface throughout the block. If not done, this may lead to the uneven quality of the block. To get a perfectly straight edge, mark a straight line inside the crook. Now pass the block through the jointer from the straight line. Now make sure to place the fence perpendicular to the table.

Step 7: Feed Properly

Now it’s time to feed the piece from infeed to outfeed. Hold the piece steadily and do not apply more pressure as it may imbalance. Hold with your left hand throughout the transition, pressuring towards the fence. Reaching on the cutter head, use your right hand to hold the piece now. Feed the block at a constant rate.

After picking the best jointer, follow the above steps properly with your wood piece or work. Constant rate is a must even while switching between the hands as it impacts the end-product a lot.

Jointer Safety Tips

Using a jointer can be easy, but proper safety is very important. Here are a few instructions to be taken care of while using a jointer:

  • Go through the manual first before using a jointer.
  • Use it in a safe and suitable environment. Make sure there is no child around you.
  • Wear safety gloves and glasses to ensure the proper safety of your eyes and hands.
  • If you are using it for the first time, make sure to work under supervision.
  • Accurately calculate the values and put proper depth.
  • While passing the wooden piece through, maintaining steady pressure towards the fence.


Using a jointer with proper safety and order is very important to use it efficiently. Hopefully, you now have learned how to use a benchtop or open stand or other types of jointer. Since practice makes a man perfect, you should start with a prototype or extra wood board. Now you can work with your wood products easily.