how to fix a lighter that wont spark image

How to Get a Lighter to Work that Stopped Sparking – Easy Fixes at Home

Other than smoking cigarettes, lighters are used globally. Matches also raise competition for lighters in the market. However, lighters are more favorable to use and economical. Other than great price and suitable work, some jet lighters and butane lighters often fail to ignite flames. Have you ever been in a situation whereby pressing igniter flames does not come up? lighter continues to produce this sound due to gas present. Do you know what happened to your lighter? Confused about how to fix a lighter that won’t spark? Read more about different ways of fixing lighter that won’t light, and get fire started easily.

How to Fix a Lighter that Won’t Spark? – 7 Different Ways

There are different categories of lighters available used by people. For this reason, demand always stays high for lighters in the market. However, during needy times lighters may stop working and make you fall into trouble. Check out different ways below and know how to make a lighter work again.

1. Turning Lighter Downward

You can fix a lighter by turning it upside down. By this method, keep the valve of your lighter in an upward direction. In addition, there is a piece of equipment known as flint inside a lighter that helps in igniting flames. It rubs against wheels to form a spark. Keep this flint safely and notice if it is in good condition. In many cases, lighters spark when turned upside down for a few minutes.

2. Lighter Cover

Always make sure to check the outer plastic cover of the lighter. If it is broken, then replace it with a new one. Do not use a broken piece of lighter cover. If you keep a lighter outside for a long time, then clean out all specks of dust and debris. Some metal wheels are rusted due to exposure to sunlight and water. Pipe cleaners come in handy to clean it.

3. Refilling

Refilling comes when there is a problem with fuel and its associated area. Check the lighter and refill it if light gets out of butane. It is willingly available in local stores near your house. Locate hole present at the bottom of each lighter and try to fit a nozzle of butane in it. Keep it straight and pressure it down until you feel metal cold. Do not shake the can of butane before refilling it.

Keep the passage cleaned between your lighter otherwise, it will put out flame due to friction with air. Always keep the lighter button off when refilling. A small fuel tank triggers the problem of the majority of lighters. The capacity of holding fuel is so low that it does not exert much pressure. This is the most common cause of non-working lighters. Look after flint carefully. If there is no flint, then spark cannot be emitted.

4. Use Good Quality Butane

Butane is among essential components to refill your lighter. Always purchase high-quality and worthy butane otherwise;, the lighter will be filled with debris and dirt. Original butane always keeps the lighter clean and never remains dirty. In addition, dirty lighters will not spark. If still your butane lighter is not sparking, go for below options.

5. Clean Lighter Regularly

Essential oils serve a greater purpose to clean lighter. It will add an extra shine if used with silk cloth every day. For fixing the lighter, first clean it properly; otherwise, a small amount of debris can also block operation. Next, remove all obstructions to make a lighter spark. Sometimes cleaning lighter can make a flame spark.

6. Adjust Flame

A hissing sound can be heard when it does not spark. This problem is associated with production and adjustment of flames. If the limit is too high, the force with which fuel escapes strikes flint too rapidly. It results in igniting large flames. Always adjust flame in a standard form that is present on the back of the lighter. You will find a plus sign for setting it high and a negative sign for turning it down.

Similarly, the height of the flame is adjusted using a screwdriver. There is a slot of an adjuster present on the lighter. Turn it towards the minus sign using a tool and check the lighter. If the lighter does not produce flame, then check it periodically. Replace metal around the strike wheel to prevent problems with fuel release.

7. Replace Flint

Replacement of flint is essential for letting your lighter spark again. It is present under metal for flame, so carefully remove it. A spring is attached to it that is about an inch long. Put a new flint in place of the old one and watch spark. Flints are readily available for buying online or at a store. Zippo lighters need to be opened separately to replace flint. Pull out the chimney and notice a small soft thing under it. Take that outside using a screwdriver and replace the flint.

Tips to Remember When Lighter is not Working

In the process of fixing the lighter that is not lighting, follow the below tips carefully

  • BIC lighters come with a child safety band that makes them safe. Always pull the safety band down or lighter to remove metal around the wheel.
  • Permanently remove metal or lighter using tools like a blade.
  • A Zippo lighter is turned upside down automatically when you refill fuels.
  • Be aware of not tampering with any lighter when fluids are refilled; otherwise, it will lead to an explosion.
  • If your lighter becomes overfilled, light lighter from a matchstick, then allow fluid on top to burn for a few minutes.

Other Problems with Lighters

Some other issues why your butane lighter not sparking are as follows.

Jammed Up Lighters

Lighters sometimes can become too jammed up. For this purpose, replace the flint because small remnants are stuck with the wheel. After replacing, you will see a new flame and spark.

Altitude Problem

Some butane lighters face problems due to high altitudes as fuels are mixed with different parameters. The ratio of fuels needs to be adjusted with light or dense air quality. Control flow of butane in lighter using rotating switches according to altitude. If you operate lighter at a lower altitude, airlocks come in front of the valve. It will make pressure equal.

Incorrect Filling of Butane

For sure, about correct butane filling in the tank, turn light downward and cast down the filler valve with tools. Remain cautious about overflow of liquid. Hold the lighter in your hand for a few minutes before igniting it. Excessive butane flows away, and gas stays at normal temperature.


It is concluded that a lighter can be fixed in many ways depending upon where it broke down. Follow steps mentioned above to fix it quickly in a short period. As it is an equipment of inflammable material, so always remain cautious and stay away from other lighting sources while refilling or fixing your lighter. It is better to keep lighters handy instead of carrying them under pressure inside bags. Be aware of explosive lighters. Do not forget to bleed your lighter when fuel level drops beyond normal.